When you’re garage door remote stops working, it could be traced to several issues. These tips will help you troubleshoot the problem.

What to Do When Your Garage Door Remote Messes Up

Your garage door remote is supposed to be a convenience that allows you to open and close your garage door with ease. These devices get used frequently, so they are bound to fail at some point. Troubleshooting remotes can be a simple garage door repair in Los Angeles. Follow these tips to learn why your door remote isn’t working.

Replace the Batteries in the Garage Door Remote for an Easy Garage Door Repair

When your remote messes up, the first thing to do is replace the battery. Before you replace the battery, open the panel on the back, and inspect the battery contacts. Clean dirty or rusty contacts with fine-grit sandpaper, and insert a new battery. If the contacts have severe corrosion, replace the remote.

Check for Dirt and Obstructions Near the Photo Eyes

The photo eye receives the signal from the remote to open or close the door. A dirty or misaligned photo eye can black the signal. Wipe the eye with a soft cloth and streak-free cleaner, and then let them dry. Also, make certain no obstructions block the signal, such as equipment or garbage cans. If you notice issues in daylight, the sun’s rays could be interfering with the signal.

Realign the Garage Door Photo Eyes

Most modern garage doors have two photo eyes that should point toward one another and be the same height. Measure the height of the photo eyes using a level. If they are even in height but point in different directions, look for an adjustment screw, and use a screwdriver to loosen or tighten it.

Depress the Lock Button

Some garage doors have lock buttons, or vacation locks, to prevent operation with a hand remote. Check to be certain the lock button hasn’t been depressed on the wall panel. This can happen while you work around it and indicated by a flashing light. Press and hold to deactivate it.