How Professional Mechanics Repair Broken Garage Doors

Garage doors have long easy lives. However, just like other mechanical equipment, they might bite the dust and stop operating as they should. Fortunately, their simplicity in construction calls for easy garage door repair solutions. Below are some of the ways through which professional mechanics conduct garage door repairs in Los Angeles.

1. Rust Hinges and Rollers

Garage door mechanics often dip all rollers, hinges, roller tracks, and latches onto citrus-based solvents or a penetrating solvent like WD-40. While at this, they lubricate all bearings and extension spring openers thoroughly. The mechanic might also pour oil onto the torsion spring if it is rusty or it binds up.

2. Noisy Door

Noisy doors can cause quite disturbing sounds, especially to those who sleep next to the garage. Luckily, noisy garage doors can be repaired quite easily by conducting some routine procedures.

Replace the rollers. It is very common for malfunctioned rollers to produce unnecessary noise when moving down and up the door track. If the rollers are the main source of the noise, purchase new ones. Normally, five section doors require twelve rollers. Additionally, nylon rollers perform better than metal rollers since they do not require frequent lubrication.

Tighten the nuts. Garage door technicians might use a socket wrench to tighten the door’s nuts. You should, however, ensure that the nuts are not too tight.

Replace the hinges. Over time, the hole housing the stem grows worn and old. Ensure that the professional checks all hinges and replaces any hole that has lost a circular shape.

3. Frozen Door

During the winter, low temperatures and moisture combine to compromise the door’s effectiveness. A garage door, during colder months, might stick to the floor. Sometimes, it might be a small connection, which can be easily broken. Other times, however, the door might refuse to move up completely. In such cases, the professional should use a heat dryer to melt the connection.